FLIR DNR516, Instruction Manual

Page: 17 / 198

DNR500 Series Series Front Panel 4
4. Arrow Buttons and Dial :
• Arrow Buttons : Press to move cursor in menus. In live view, press up to change
split screen layout; press left / right to select channels when single-channel mode is
selected.
• Dial : In live view, turn left / right to select split-screen layouts.
5. Power Button : Press and hold to power off the system. Press to power the system
back on.
6. IR Receiver and LED Indicators : IR receiver for the remote control. Keep the IR re-
ceiver clear from obstructions.
LED Indicators :
• STATUS: Glows to indicate CPU is in normal state.
• ACT : Flashes when remote control is used.
• POWER : Glows to indicate the system is on.
• Channel Indicators : Flashes slow when channel 1~16 are recording. On 32–chan-
nel models, flashes fast when channels 17~32 are recording. For example, if the
light for channel 1 is flashing fast, it indicates channel 17 is recording. Glows solid
to indicate both corresponding channels (e.g. channel 1 and channel 17 are
recording).
7. IR : Not supported.
#LX400023; r. 1.0/17332/17359; en-US
7