Flexim PIOX S502ID, Operating Instruction

Page: 42 / 64

8 Start-up
8.1 Start-up settings
PIOX S502ID
2020-01-24, UMPIOX_S502IDV1-2EN
42
8 Start-up
8.1 Start-up settings
When starting up the transmitter for the first time, the following settings are required:
• language
• units of measurement
• date/time
These displays will only be indicated when the transmitter is switched on for the first time.
The available transmitter languages are displayed.
• Select a language.
• Press ENTER.
The menus are displayed in the selected language.
• Select metric or imperial .
• Press ENTER.
Warning!
Installation, connection and start-up by unauthorized and unqualified personnel
This may result in personal or material damage or dangerous situations.
→ Any work on the transmitter has to be carried out by authorized and qualified personnel.
Caution!
Safety and accident prevention regulations for electrical systems and equipment
Failure to observe these regulations may lead to severe injuries.
→ Observe the safety and accident prevention regulations for electrical systems and equipment.
Caution!
Warning of severe injuries from hot or cold components
Touching hot or cold components can lead to severe injuries (e.g., thermal damage).
→ Any mounting, installation or connection work has to be concluded.
→ Any work on the measuring point during the measurement is prohibited.
→ Observe the ambient conditions at the measuring point during installation.
→ Wear the required personal protective equipment.
→ Observe the applicable rules.
Notice!
The transmitter and transducers have to be checked to ensure proper condition and operational safety before each use.
The transmitter housing must always be closed during operation. Observe that maintenance work must be concluded.
Select language
Engineer. Units