Flexim PIOX S502ID, Operating Instruction

Page: 13 / 64

4 Product description
PIOX S502ID 4.1 Measuring system
13
UMPIOX_S502IDV1-2EN, 2020-01-24
4 Product description
4.1 Measuring system
The measuring system consists of the transmitter, the temperature probe, the ultrasonic transducers and the pipe on
which the measurement is taken.
The transducers are mounted on the outside of the pipe. They send and receive ultrasonic signals through the fluid.
The transmitter controls the measuring cycle, eliminates noise signals and analyzes useful signals. The measured values
can be displayed, used for calculations and transmitted.
4.2 Handling concept
The selected program branch is displayed in capital letters and angle brackets. The complete designation of the selected
program branch is displayed in the lower line.
Select a program branch by pressing
and . Press ENTER.
•START (Setup + measure)
•SPECIALS (Special setups)
Fig. 4.1: Example of a measurement arrangement
1 – transducer
2 – temperature probe
3 – pipe
4 – transmitter
Fig. 4.2: Command panel of the transmitter
1 – display
2 – keyboard
Tab. 4.1: Description of the program branches
program branch description
START Before starting a measurement, the transducer, pipe and fluid parameters have to be entered in the
program branch START .
SPECIALS A selection, e.g., of the temperature probe and the outputs, can be made in the program branch
SPECIALS .
1
3
4
2
AV AV
S
AGN ARS AR
1
2
>START< specials
Setup + measure