8 Start-up
PIOX S502ID
8.5 Instrument information
45
UMPIOX_S502IDV1-2EN, 2020-01-24
8.5
Instrument information
• Select the menu item
Instrum. Inform.
to get information about the transmitter.
• Press ENTER.
The type and the serial number of the transmitter are displayed in the upper line.
The max. available data logger will be displayed in the lower line (here: 18 327 additional measured values can be stored).
• Press ENTER.
The firmware version of the transmitter is displayed with the date in the lower line.
• Press ENTER.
8.6
Interruption of the power supply
As soon as the measurement begins, all current measuring parameters will be stored in a non-volatile INIT-resistant
EPROM. In case of a power supply failure, the measurement will be stopped. All entered data remain stored.
After the power supply has returned, the serial number is displayed in the lower line for a few seconds.
The interrupted measurement is continued. All selected output options are still activated. The measurement will not be
continued after the return of the power supply if an initialization has been performed.
SPECIALS\Special setups\Instrum. Inform.
S502ID
-XXXXXXXX
Free:
18327
V x.xx
dd.mm.yy
S502ID
-XXXXXXXX
Summary of Contents for PIOX S502ID
Page 1: ...PIOX S502ID UMPIOX_S502IDV1 2EN Operating instruction ...
Page 63: ......
Page 64: ......