Flexim FLUXUS F704**-A2 Series, User Manual

Page: 86 / 192

FLUXUS F70x 7 Connection
86 UMFLUXUS_F7V4-6-2EN, 2017-10-01
FLUXUS F709
• Disconnect the power supply from the transmitter.
• For the connection of the AMP-Quick connector (connection system AS), see section 7.1.2.1.
• For the connection of the separate sensor module (connection system TS):
– Insert the sensor module into the terminal strip KL5 or KL7 (see Fig. 7.4 and Fig. 7.54). The slots SA1...SA4 are as-
signed to the transducers of measuring channel A, the slots SB1...SB4 are assigned to the transducers of measuring
channel B.
• Connect the transmitter to the power supply.
• Enter all parameters of the program branch
Stop Charging
.
• Press ENTER until the main menu is displayed again.
7.8 SD Card (Optional)
Additionally, the transmitter FLUXUS F704, F705, F706 can be equipped with an SD card (see Fig. 7.55). Measured val-
ues can be stored on the SD card for a longer period of time.
At first, the serial data transmission has to be parametrized. For the parametrization and activation of the serial data trans-
mission see section 12.2.
When the housing is opened, the SD card can be extracted and the measured values can be read out by a PC.
Fig. 7.54: Transmitter FLUXUS F709
Attention! Observe the "Safety Instructions for the Use in Explosive Atmosphere" (see document SIFLUXUS).
Fig. 7.55: Transmitter FLUXUS F70x (example with F704)
K L 7
K L 5
K L 3 K L 1
X 7
K L 4 K L 2
X 6 A V X 8 B V
X 6 A R X 8 B R
X 5
B A
K L 6
K L 8
C H A N N E L
S A 3
S A 1
S A 2
S A 4
S B 3
S B 1
S B 2
S B 4
A V S
A V
A R S
A G N
A R
B V S
B V
B R S
B G N
B R
4 A +
4 B -
4 2
4 3
4 1
L +
L -
N
L 1
P E
P 6 a
P 7 a
P 7 +
P 5 a
P 6 +
P 2 +
P 5 +
P 1 +
P 3 +
P 4 +
P 6 b
P 7 b
P 7 -
P 5 b
P 6 -
P 2 -
P 5 -
P 1 -
P 3 -
P 4 -
T 4 A
T 4 B
T 3 B
S 3
T 3 A
T 1 B
T 2 B
T 1 A
S 1
T 2 A
T 4 a
T 4 b
T 3 b
S 4
T 3 a
T 1 b
T 2 b
T 1 a
S 2
T 2 a
sensor module
measuring channel A
sensor module
measuring channel B
SD card