Fisher-Price T2713, Manual

Page: 42 / 56

42
Problem Probable Cause Solution
Motor is not running; no swinging Power is not on Turn the power dial to one of six settings.
Batteries incorrectly installed Remove the batteries and replace in correct
orientation, as indicated inside the
battery compartment.
Dead batteries Replace all four batteries with four, fresh “D”
alkaline batteries.
Motor is running but swinging stops after
a few minutes Need to start swinging motion To start swinging motion, give the seat a light push.
Swing motion setting is inappropriate for
child’s weight Adjust the power dial to a higher speed setting and
give the seat a light push.
Weak batteries Replace all four batteries with four, fresh “D”
alkaline batteries.
No difference noticed in swinging motion after
power dial is adjusted Swing did not have sufficient time to adjust to
different setting Allow the swing time to adjust to new setting.
Weak batteries Replace all four batteries with four, fresh “D”
alkaline batteries.
Swinging motion too high even at the lowest setting Normal operation To slow swinging motion, place one end of a blanket
underneath your child and let the other end drape
down while swinging.
Waterglobe (lights)/mobile, music/sounds do not
work and swing is off Power dial is not on correct setting
Position the power dial to the position.
Dead batteries Replace all four batteries with four, fresh “D”
alkaline batteries.
Waterglobe (lights)/mobile, music/sounds turn off
automatically after seven minutes
Press the reset button to restart waterglobe
(lights)/mobile, music/sounds for another
seven minutes.
Music/sounds do not work (and power dial is set
to
)
Music/sounds switch is in OFF position
Slide music/sounds switch to desired
setting
.
Music/sounds turn off automatically after
seven minutes
Press the reset button to restart music/sounds for
another seven minutes.
Waterglobe (lights) does not work (and power dial is
set to
)
Mobile/waterglobe switch is in OFF position or
mobile only position
Slide mobile/waterglobe (lights) switch to desired
setting
.
Waterglobe (lights)/mobile turn off automatically
after seven minutes
Press the reset button to restart waterglobe
(lights)/mobile for another seven minutes.
Mobile does not work (and power dial is set to )
Mobile/waterglobe (lights) switch is in OFF
position or waterglobe only position
Slide mobile/waterglobe (lights) switch to desired
setting
.
Mobile/waterglobe (lights) turn off automatically
after seven minutes
Press the reset button to restart mobile/
waterglobe (lights) for another seven minutes.
Problems and Solutions