FISCHER FISCHERSCOPE X-RAY 4000 Series, Operator'S Manual

Page: 85 / 170

List of Task Commands Task programming
FISCHERSCOPE
®
X-RAY 85
p62V2Sets variable 2 = V3
p63V3Sets variable 3 = V3
p71L V1 = V1 -1, if V1 > 0 GOTO label L
p72L V2 = V2 -1, if V2 > 0 GOTO label L
p73L V3 = V3 -1, if V3 > 0 GOTO label L
Accessories
f42 S Creates a text box on the screen (Text = S)
Returns TRUE or FALSE (Button [OK] or [Cancel])
f50 - Starts a reference measurement
f64 N Sets a delay (pause) of N sec.
f90 - Closes a window if not the main window
(If no window can be closed then return code = ERROR)
f91 - Reset X-RAY, new PC-Communication, new HV
control etc.
p98- Singlestep mode: Task is carried out by single steps
following F4 key print
p99- Singlestep mode (p98) OFF
… depending on the last readings (tolerance limits) …
p80S,LS symbolizes a logical relation acc. to the table given
below. In case of TRUE (the respective relation is
fulfilled) the task steps to label L.
… depending on the last measurement data … (specification
limit)
p80S,LS symbolizes a logical correlation according to the
table below.
In case of TRUE (the respective relationship is fulfilled), the task
will jump to label L.
S Meaning
(“i” represents the number of the measurement data column)
> KiReading no. i (i=1,2,3) > USL
< KiReading no. i (i=1,2,3) < LSL
> KXminimum 1 reading is > USL
< KXminimum 1 reading is < LSL
?Ki Reading no. i (i=1,2,3) is not measurable