FISCHER FISCHERSCOPE X-RAY 4000 Series, Operator'S Manual

Page: 125 / 170

FISCHERSCOPE
®
X-RAY 125
Export Settings Measurement Data Export
Table 16-2: Explanation of the controls of the Exporting data window
Control Explanation
Online-Export ON The measurement data is exported continuously when
measurement data is acquired by the instrument.

The reading is exported directly after a measurement is made.

The block statistics are exported upon block closure.

With product selection, the header is exported.
Template and No. The name and the number of the export template are displayed if
an export template is assigned to the current Product.
► To assign an export template, click Select… .
Deletes the assignment of an export template to the product.
Export destination
append to file Data is successively written to a file.
Complete file-
handshake
(NET_EXPT.END) WinFTM waits until the handshake file NET_EXPT.END is
deleted. This control box should be enabled only, if the technology
of the target computer is capable of handling it.
overwrite file The export file contains only the last exported values, i. e. the old
data will be overwritten.
Destination file Displays the destination file, if already assigned.
► To assign a destination file for the data export, click Select… .
Filename variable By clicking the list box you can select a rule, how the file name of
the exported data will be created.
send to serial
port Data is sent directly to the RS232 interface.
The parameters of the RS232 interface and of the WinFTM
software of the receiving instrument must be the same. Otherwise
the receiving instrument will not be able to read the data exported
via the RS232 interface.
► To set the parameters of the RS232 interface select
Evaluation > Export > Define export interface… .
to OLE-
Automation WinFTM can be remote controlled via OLE and can transfer data
via OLE. A Visual-Basic (Version 6) program example is included
on the WinFTM installation CD in the directory
Service\OLE_Import_Sample_VisualBasic_6.0\AutomationDemo .
This sample program can be used as a template for the customers
own remote control software.