FISCHER FISCHERSCOPE X-RAY 4000 Series, Operator'S Manual

Page: 20 / 170

20 FISCHERSCOPE
®
X-RAY
Switching the Instrument on and off Switching off the Instrument
3.2 Switching off the Instrument
To switch off the instrument and the PC
1. Switch off the instrument by using the Off/On rocker switch at the rear of the instru-
ment.
2. To terminate WinFTM, select File > Exit .
3. To shut down the PC, select Start > Shut down .
4. Switch off the monitor and the printer, if present.
3.3 Communication between Instrument and WinFTM
Communication between instrument and WinFTM is necessary to obtain measurements
with the instrument.
Determining the current communication condition

If the communication is enabled, the measurement distance appears in the status bar.

If the communication is disabled, XRAY Communication OFF appears in the status
bar of the WinFTM window.
It is not possible to make measurements when the communication is disabled, that is,
when WinFTM is in demo mode.
To enable the communication
► In the WinFTM main window select General > Communication ON .
To disable the communication
► In the WinFTM main window select General > Communication OFF .