Fischer Panda AGT 6000 PVMV-N, Manual

Page: 56 / 132

Installation Instructions
Page 54 AGT 6000 PVMV-N 12V_24V - Chapter B: Installation Instructions
Essential coolant amounts:
Panda 4500 ............................... min. ca. 10 l/min
Panda 8000 - 9000 ...................approx. 16 bis 22 l/min
Panda 12000 - 14000 ..............approx. 24 bis 28 l/min
Panda 18 - 24 ........................... approx. 32 bis 38 l/min
Panda 30 - 32 ........................... approx. 40 bis 45 l/min
Panda 42 - 65 ........................... approx. 50 bis 60 l/min
The greater the amount of coolant circulating, the lower the difference in temperature. If the
necessary cooling performance cannot be achieved, the amount circulating can be increased by
adjusting the pulley on the pump and thereby raising the performance.
ATTENTION! The coolant pressure may, however, not exceed 0.7 bar!
Construction and position of the radiator
The radiator can be assembled away from the generator in a well ventilated position. Attention
must be paid that the radiator emission direction is completely free of obstruction. Turbulence is
to be avoided. There is often a clash between the streamline appearance of the chassis and the
technical requirements.
The radiator can be installed (vertically) or (horizontally). Consideration must be given to the fact
that air is drawn in via a fan motor.
The best result is achieved if the radiator is fitted vertically on the vehicle roof.
Possible positioning of the external radiator
2
1
3
1. Radiator on the roof
2. Radiator vertical 3. Radiator under the vehicle