Fischer Panda AGT 6000 PVMV-N, Manual

Page: 29 / 132

The Panda Generator
AGT 6000 PVMV-N 12V_24V - Chapter A: The Panda Generator Page 27
Glow plugs
The glow plugs serve the pre-chamber for
the heating with cold start. The heat-treat
fixture must be operated, if the tempera-
ture of the generator is under 16°C. This
is practically with each start the case. The
heat-treat fixture may be held down also
during start and favoured the starting pro-
cedure.
Fig. A.3.3-6: Glow plugs
Stop solenoid for Motorstop
Not at every genset; interrupts the fuel flow
by activating the stop lever.
Fig. A.3.3-7: Stop solenoid
A.3.4 Components of the combustion air
Combustion air intake
The sound cover is provided at the lower
surface with drillings, through which the
combustion air can influx.
It must be consistently paid attention that
the generator is installed in such a way
that from down no water can arrive into
the proximity of these air openings. (mini-
mum distance 150 mm)
Fig. A.3.4-1: Combustion air intake