System Options
Programming
FCP-75 Manual —
P/N:LS10147-003FK-E:A 3/17/2021
93
6.
Press the up or down arrows to select the type (Notification or unused). Press ENTER.
7.
Press the up or down arrows to select the desired Group, then press ENTER.
8.
Edit Module Name. See Section 9.5.3. Or, Press the right arrow to skip the module name edit.
9.
Repeat Steps 1 through 8 for all points.
9.6 System Options
This section of the manual explains how to customize software options that affect general operation of the system.This includes such items
as: Communication Options, Daytime/Nighttime Sensitivity, Holiday Schedule, Telephone and Reporting Account options. Refer to each
individual subsection for the complete instructions.
9.6.1 Communication Options
Auto Test Time
To access the Auto Test Time screen:
1.
Enter the Installer Code.
2.
Select 7 for Program Menu.
3.
Select 5 for System Options.
4.
From the next Menu, select 1 for Communication Options.
5.
Select 1 for Auto Test Time.
6.
Enter the hour you desire the control panel to send an automatic test report (or press the up or down arrow key), then press ENTER.
7.
Enter the minutes (or press the up or down arrow key), then press ENTER.
8.
Select AM or PM by pressing the up or down arrow key, then press ENTER.
9.
Select Report Time Interval by pressing the up or down arrow key, then press ENTER. Time Interval selections are 24hr, 12hr, 6hr and
4 hr.
Phone Lines
To access the phone lines screen:
1.
Enter the Installer Code.
2.
Select 7 for Program Menu.
3.
From the Program Menu, select 5 for System Options.
4.
Select 1 for Communication Options
5.
Select 2 for the Phone Lines Menu.
6.
Select the phone line to be edited (1 or 2) by pressing the up or down arrow, then press ENTER.
Figure 9.7 Phone Lines Editing Screen
Dialing Prefix
Enter up to 9 characters to be used for such things as PBX dial-out codes, a pause, and so on. The following special characters are available:
Use the number buttons on the annunciator or the up- and down-arrow keys to select special characters. Characters begin displaying after
“9”. See Figure 9.9 for an example.
NOTE:
AM and PM are only available if the panel “Clock Options” are set to AMPM mode. Otherwise, the clock is set in the military time and
you cannot select AMPM.
#
Pound (or number) key on the telephone
*
Star key on the telephone
,
Comma (character for 2-second pause)
Summary of Contents for FCP-75
Page 144: ...Cut along dotted line ...
Page 145: ...FCP 75 Manual P N LS10147 003FK E A 3 17 2021 145 ...
