3.0 SYSTEM COMPONENTS
3-8
Cheetah Xi 50 Installation Manual
UL S2203
Rev 6, 09/2015
P/N: 06-369
FM
3.4
DIGITAL ALARM COMMUNICATOR TRANSMITTER (DACT)
DACT, 5 ZONE WITH SERIAL INTERFACE
P/N 10-2528 (BOSCH FPT-DACT-LC), INTERNAL MOUNT
P/N 10-2476 (BOSCH FPT-DACT), EXTERNAL MOUNT
The Digital Alarm Communicator Transmitter (See Exhibit 3-12) is
used where point identification of alarm, supervisory and trouble
events is required at a Central or Remote Receiving Station. The
Cheetah Xi 50 transmits all system information to the DACT via an
RS485 connection. In addition, the DACT includes five
programmable point inputs that can be individually configured to
indicate seven types of system conditions: Fire Alarm, Waterflow
Alarm, Supervisory, Monitor Alarm, System Fault, AC Failure and
Low Battery. These inputs can be used in place of the intelligent
RS485 connection to provide simple alarm monitoring where the
receiving station is not capable of receiving point ID information.
Refer to Fike document 06-479 for more information.
3.4.1
DACT KEYPAD PROGRAMMER, P/N 10-2477 (BOSCH
FMR-DACT-KEYPAD)
This DACT Programmer (See Exhibit 3-13) is necessary for
configuring the 10-2528 and 10-2476 dialers referenced
above.
Refer to BOSCH document FPT-DACT “Operation &
Installation Guide” for more information.
Exhibit 3-13: DACT Programmer
Exhibit 3-12: DACT
Summary of Contents for 10-071
Page 75: ......
