3.0 SYSTEM COMPONENTS
UL S2203
Cheetah Xi 50 Installation Manual
3-9
FM
P/N: 06-369
Rev 6, 09/2015
3.5
PERIHERAL BUS DEVICES
Several optional components can be installed on the Cheetah Xi 50 controller’s RS485 peripheral bus (31
devices maximum) to provide remote annunciation and control of system events, and to expand the systems
operational capabilities. A brief description of each component and its functionality is provided in this section
for reference purposes. For a complete description of each module’s functionality, installation and wiring,
refer to the referenced document.
Unless noted otherwise, all peripheral devices are mounted external to the Cheetah Xi 50 enclosure.
3.5.1
FOURTEEN BUTTON REMOTE DISPLAY UNIT,
P/N 10-2646
The Fourteen Button Remote Display Unit (See Exhibit 3-14)
provides a 4x20 character LCD that mimics the host control
panel’s display. This allows system status information to be
displayed at a remote location. The unit is equipped with
eight programmable buttons that can be used to perform
system control functions such as Reset, Silence,
Acknowledge, etc. Switch functions are protected by the
unit’s integral security access key. In addition, the RDU is
equipped with an internal piezo and five status LEDs that
provide instant audible and visual notification of system
status changes.
Refer to Fike document 06-610 for more information.
Note:
This unit can only be used on systems with
panel firmware V3.0 or higher.
3.5.2
TEN BUTTON REMOTE DISPLAY UNIT, P/N 10-2631
The Ten Button Remote Display Unit (See Exhibit 3-15) provides
a 4x20 character LCD that mimics the host control panel’s
display. This allows system status information to be displayed at
a remote location. The unit is equipped with four control
switches that allow initiation of system Drill, Acknowledge,
Silence and Reset functions from the unit. Switch functions are
protected by the unit’s integral security access key. In addition,
the RDU is equipped with an internal piezo and five status LEDs
that provide instant audible and visual notification of system
status changes.
Refer to Fike document 06-610 for more information.
Note:
This unit can only be used on systems with panel
firmware V3.0 or higher.
Exhibit 3-15: Ten Button
Remote Display Unit
Exhibit 3-14: Fourteen Button
Remote Display Unit
Summary of Contents for 10-071
Page 75: ......
