Festo PROFIBUD-DP, Elektronics Manual

Page: 68 / 154

2. Commissioning CPV−DI02 (PROFIBUS−DP)
2−10
Festo P.BE−CPV−DI02−EN en 0704NH
2.3 C o n f i g u r a ti o n w it h a S ie m en s mas te r
No te
Various configuration programs are available for use in
conjunction with a Siemens master. Please observe the
relevant procedure for your configuration program.
The following sections describe as an example the main con
figuration steps with the STEP7 software. It is assumed that
the reader is already familiar with the information in the man
ual for the STEP7 software.
Information on operation with general DP masters can be
found in appendix A.2.
2.3.1 STEP 7 HW Config (up to V 5.2) preparations
GSD 1. Copy the GSD of the valve terminal into the directory
...\STEP7\S7DATA\GSD on your PC/programmer.
File: CPV_0A35.GS*
(Reference sources for the GSD see section 2.2)
The GSDs can either be:
copied manually into the above mentioned directory
(e.g. with Windows Explorer) or
loaded via the menu [Options] [Install new GSD].
No te
Update the hardware catalogue if you copy the GSD during
work with STEP7.
Menu in HW Config: [Options] [Update catalogue]