Festo CP Factory, Original Operating Instructions

Page: 83 / 90

Error messages and message texts at the HMI
© Festo Didactic 8065842 en
83
9.1 Message texts
9.1.1 Message texts of the application module labeling
Melde-
Klasse
Location Alarmname
0 ActuatorCntrApp X-axis
Timeout: Sensor end position PH_BG1 not reached/left!
Check sensor / end position.
Instance: X-axis.
0 ActuatorCntrApp X-axis Timeout: Sensor end position PH_BG2 not reached/left!
Check sensor / end position.
Instance: X-axis.
0 ActuatorCntrApp X-axis Timeout: both sensors from end positions PH_BG1/PH_BG2 have same
signal!
Check sensors/end positions.
Instance: X-axis;
0 ActuatorCntrApp Z-axis_up Timeout: Sensor end position PH_BG3 not reached/left!
Check sensor / end position.
Instance: Z-axis_up.
0 ActuatorCntrApp Z-axis_down Timeout: Sensor end position PH_BG4 not reached/left!
Check sensor / end position.
Instance: Z-axis_down.
0 ActuatorCntrApp Vacuum Timeout: feedback from sensor (PH_BP6) without control of actor
PH_MB6!
Instance: Vacuum.
Check control / sensor
0 ActuatorCntrApp Vacuum Timeout: no feedback from sensor (PH_BP6) by activating actor PH_MB6!
Instance: Vacuum.
Check control / sensor
0 ActuatorCntrApp BlowAir Timeout (5000 ms) activating actor PH_MB7!
Instance: BlowAir.
0 ActuatorCntrApp CutPulse Timeout (3000 ms) activating actor @1%s@!
Instance: CutPulse.
0 ErrorApp ErrPrinterJob Timeout: No feedback from printing order;
Parameter ONo: 1021 OPos: 1;
PLC: plcLabel;
Instance: ErrPrinterJob.
0 ErrorApp ErrLabelNotPlaced Label was not placed / sucking plate not free! (Sensor: PH_BP6); remove
label!
PLC: plcLabel;
Instance: ErrLabelNotPlaced.
0 LabelPrintSrv WarnPrinterOFF Printer not switched on!
Please check printer!
0 LabelPrintSrv WarnPrinterPaused Printer in break mode:
Please check printer!