Festo CP Factory, Original Operating Instructions

Page: 84 / 90

Error messages and message texts at the HMI
84
© Festo Didactic 8065842 en
9.2 Interactive error messages
9.2.1 Default operation
Interactive messages are displayed via a pop-up window at HMI
The Pop Up has three buttons.
Example application module output - interactive error message in default mode
Position Note
1 Repeat - An attempt is made to run the application again.
2 Ignore – The error status is ignored; the workpiece carrier receives the status code as indicated in the transition
table in the "Initial status" column. The application is no longer executed.
3 Abort – The error status is ignored; the workpiece carrier receives the status code as shown in the input / output
field next to the value displayed. This can be changed in this interactive error message window.