Festo CP Factory, Original Operating Instructions

Page: 82 / 90

Error messages and message texts at the HMI
82
© Festo Didactic 8065842 en
9 Message texts and interactive error messages at the HMI
In general, there are three different reporting classes. These are designed as follows
•
Message class 0 (displayed red in the message line)
- the program is immediately stopped and the automatic mode is terminated
- the cause of the error has to be fixed
- Then acknowledge the fault and restart the station
•
Message class 1 (displayed red in the message line)
- the program and the automatic mode are stopped at the end of the cycle
- the cause of the error has to be fixed
- Then acknowledge the fault and restart the station
•
Message class 2 (displayed yellow in the message line)
- the program and the automatic mode are executed further
- If the cause of the fault is fixed, the error is automatically acknowledged
•
Note
- Displayed on the HMI but not processed in MES