Felder G 500, User Manual, Page: 46 / 84

46 47

Maintenance
Edgebander
G 500
9.2 Maintenance schedule
Interval Description Task to accomplish
Daily General cleaning Remove chips and dust with a vacuum cleaner.
Do not used appliances using pressurised air or metal
appliances.
Clean glue pot.
every 150 hours Clean glue reservoir Remove the cover and stir glue with a wooden spatula.
Remove any burnt glue remnants.
Crawler Remove chips and dust from the tracks and gliding shoes.
Grease the circulation ball shoe through the greasing nipple.
Check tension and remove dust with a vacuum cleaner (do not
grease).
Lubricate through the lubrication bushing.
every 300 hours Drive chains Check tension and remove dust with a vacuum cleaner (do not
grease).
every 500 hours Drive chain bracket Grease.
Attention: Cleaning and care products are available as accessories (see FELDER catalogue).
9.3 Lubrication table
Type Description
Shell Tivela S320 Lubrication for reduction gears
Molycote DX (Fett) Chain and connector guide
SKF LGMT 3/0,5 Linear guide
Anti-Haftstoff ACMOSOL 130-172 Brush lubricator
Clean corners/
Form moulder unit
Re-cutter and edge
scraper