Felder G 500, User Manual, Page: 20 / 84

20 20 21 21

Transport, packaging and storage
Edgebander
G 500
Keep items sealed in their packaging until they are
assembled/installed and be sure to observe the stacking
and storage symbols on the outside of the packaging.
Store packed items only under the following conditions:
• Do not store outdoors.
• Store in a dry and dust-free environment.
• The machine must be covered with tarpaulins or ny-
lon and raised from the ground.
• Do not store anything on the machine.
• Do not expose to aggressive substances.
• Protect from direct sunlight.
• Avoid subjecting the machine to shocks.
• Storage temperature: -10° to +50° C.
• Maximum humidity: 60%.
• Avoid extreme temperature fluctuations (condensation
build-up).
• Apply a coat of oil to all bare machine parts (corrosi-
on protection).
• When storing for a period longer than 3 months, ap-
ply a coat of oil to all bare machine parts (corrosion
protection). Regularly check the general condition of
all parts and the packaging. If necessary, refresh or
re-apply the coat of anti-corrosive agent.
• If the machine is to be stored in a damp environment,
it must be sealed in air-tight packaging and protected
against corrosion (desiccant).
6.3 Transport inspection
Upon arrival, inspect the shipment to ensure that it
is complete and has not suffered any damage. Any
complaints must be made in writing within 8 days of
receiving the machine.
If any transport damage is visible, do not accept the
delivery or accept it only with reservation. Record the
If no agreement has been made with the supplier to take
back the packaging materials, help to protect the envi-
ronment by reusing the materials or separating them ac-
cording to type and size for recycling.
Attention! Dispose of the packaging materials in an environmentally friendly way and always in accord-
ance with local waste disposal regulations. If applicable, contract a recycling firm to dispose of the pack-
aging materials.
Attention: Help preserve the environment! Packaging materials are valuable raw materials and in many
cases, they can be used again or expediently reprocessed or recycled.
scope of the damage on the transport documents/
delivery note. Initiate the complaint process.
For all defects that are not discovered upon delivery, be
sure to report them as soon as they are recognised as
damage claims must be filed within a certain period, as
granted by law.
6.4 Packaging
6.5 Storage