Felder G 500, User Manual, Page: 21 / 84

20 20 21 21
Edgebander
G 500
7 Setup and installation
7.1 Safety instructions
Warning! Risk of injury: Improper assembly and installation can lead to serious bodily injury or equip-
ment damage. For this reason this work may only be carried out by authorised, trained personnel who are
familiar with the operation of the machine and in strict observance of all safety instructions.
Warning! Danger – electric current: Work on electrical fittings may only be carried out by qualified person-
nel and in strict observance of the safety instructions.
Before assembling and installing the machine, check to
make sure it is complete and in good condition.
Warning! Risk of injury: An incomplete, faulty or damaged machine can lead to serious bodily injury or
equipment damage. Only assemble and install the machine if the machine and its parts are complete and
intact.
Attention! Risk of material damage: Only operate the machine in ambient temperatures from +10° to
+40° C. If the instructions are not followed, damage may occur during storage.
• Ensure that there is sufficient space to work around
the machine. If there is not sufficient distance
between the machine and neighbouring machines,
walls or other solid objects, the rail-guided workpi-
eces pose a risk during the sawing process.
• Keep the work area orderly and clean. Components
and tools that are not put in their correct place or put
away may be the cause of accidents!
• Install the safety equipment according to the instruc-
tions and check that it functions properly.
Setup and installation
Warning! Risk of injury! It is forbidden to dismantle the compensator mechanism (pressurised gas cylinder)
of the protection cabines. If the machine is used in series with other machines, the necessary blocks must
be made between it and the other machines by the manufacturer or one of its contractors.