Felder G 500, User Manual, Page: 44 / 84

44
���������������������������������������
�� ��
����������������������
�����������
�
�����������
�
�
�
!
���������������������������������������
�� ��
����������������������
�����������
�
�����������
�
�
�
!
"
#
Inspecting and setting
Edgebander
G 500
8.11 Electrical box
To reach the electrical panel it is necessary to open the
door with the key supplied with standard equipment.
Description of components:
!
Overload protection
"
Locking device
#
Inverter for HF motors
Fig. 42: Electrical box
Attention! Any operations, maintenance or adjustments must be done only with machine turned off, main
switch on O (zero), padlocked; compressed air disconnected and make sure that the maintenance or ad-
justments are done only by qualified persons.
To substitute fuses proceed as follows:
• cut off main electric supply
• position main switch on O/OFF and padlock it
• disconnect the compressed air tube
• open the boxes 1 fig. 43
• substitute the burnt fuses, and replace all into posi-
tion following instructions backwards
Anyhow if you should have to change often the fuses it is
necessary to ask for assistance by a specialized electri-
cian to eliminate problem.
Fig. 43: Locking device