Felder G 500, User Manual, Page: 30 / 84

30 30 31 31
���������������������������������������
�� ��
����������������������
�
�
�
����������
�
!
"
#
$
8.5 Pressure rollers
Fig. 20: Pressure rollers
The function of these 3 rollers is to assure and good
edge gluing on the panel.
• Act on the knob until the measure is reached on the
numerical indicator.
• The force of contrast (pressure) of the rollers is adjust-
able by acting on screw loosening nut. By tightening
nut the pressure decreases, by loosening it increases.
• It is advisable to clean machine periodically remov-
ing any glue residue. To clean only use wooden or
plastic tools so that you do not damage the surface
of the rollers. The bearings of the rollers are tin-plated
and lubricated “for-life”. Periodically clean with
compressed air and lubricate the sliding bars and the
push springs.
Inspecting and setting
Edgebander
G 500
8.5.1 Cleaning and lubrication
It is advisable to clean machine periodically removing
any glue residue. To clean only use wooden or plastic
tools so that you do not damage the surface of the rol-
lers. The bearings of the rollers are tin-plated and lubrica-
ted “for-life”. Periodically clean with compressed air and
lubricate the sliding bars and the push springs.
!
Knob
"
Screw
#
Nut
$
Display