Felder G 500, User Manual, Page: 15 / 84

14 15

4.5 Particle emission
The machine was tested for particle emissions according
to DIN 33893. The Wood Authority ascertained, ac-
cording to the „Principles for Testing Particle Emissions“
(workplace-related particle concentrations) of woodwor-
king machines, that the particle emission values for this
machine are notably below the currently valid atmosphe-
ric limit of 2.0 mg/m³. This is certified by the blue label
„BG Wood Particle Tested“.
4.6 Noise emission
The specified values are emission values and therefore
do not represent safe workplace values. Even though a
relationship exists between particle emission and noise
emission levels, an inference cannot be made about whe-
ther additional safety measures need to be implemented.
Factors which can significantly affect the emission level
that presently exists at the workplace include duration
of the effect, characteristics of the workspace, and other
ambient influences. The permissible workplace values
may also differ from country to country. Nevertheless,
this information is provided to help the operator better
assess hazards and risks. Depending on the location of
the machine and other specific conditions, the actual
noise emission values may deviate significantly from the
specified values.
Attention: To keep the noise emission as low as possible, always used sharpened tools and use the correct
speed.
4.4 Electrical connection
Mains voltage 3x 400 V
Safeguarding see Data plate
Ear protection must always be worn; however, such
protection cannot be considered a substitute for properly
sharpened tools or the correct speed.
Sound power level Workplace emissions values
Idle
Decibel (A) Decibel (A)
Working
Decibel (A) Decibel (A)
Specifications
Edgebander
G 500