Felder G 500, User Manual, Page: 17 / 84

17 17
���������������������������������������������
����������������������������������������������������������
�����������
����������������������������������������������
�� ���
��� ��� ��
�������
������
Setting up the machine
Edgebander
G 500
Fig. 3: Data plate
5.2 Data plate
The data plate displays the following specifications:
• Manufacturer info
• Model designation
• Machine number
• Voltage
• (Phases)
• Frequency
• Capacity
• Electricity
• Year of construction
• Motor specifications
5.3 Electrical control panel
Thermoregulator to control the temperature of the glue
pot with double display :
!
“Enter” confirms the value selected with 6
"
“AL” control LED for the parameter AL
#
“SP2” STAND-BY temperature (set at 160° C)
$
“SP1” working temperature (set at 200° C)
%
Thermoregulator display. it shows the temp. of the
glue, also the values SP1-SP2 e “AL”.
&
“+” “-” They sets the value desired for SP1 and SP2
Selectors ON/OFF:
/
“ON/OFF” Edge guillotine from the coil. ON for
edge in coils and OFF for edges in strips
!
Fig. 4: Electrical control panel
(
“ON/OFF” End trimmer. OFF = end trimmer exclusion
)
“ON/OFF” Heatable infeed fence (option)
Start/Stop buttons for the unit :
BL
Starts buffers
BM
Starts end trimmer and flush trimmers
BN
Start the motor of the panel chain feeder
BO
„OFF“ Stops all the functions started by “10” “11” e “12”
BP
EMERGENCY-STOP button
Adjusting the temperatures SP1+SP2
• Press SP1 or SP2
• Adjust the value using + or – and press ENTER to
confirm
The machine has an automatic temperature reduction
system:
If the machine is idle for 20 minutes the temperature
sinks automatically to the SP2 value specified. If the
machine is to be re heated to operational temperature
(SP1), then this process can be starte by pressing SP1
twice.
"
#
$
% & /*) BP
BOBNBM BL