Fayat CC424CHF Instruction Manual Download Page 113

Page: 113 / 158

Maintenance, 10h

4812159501_D.pdf

2018-04-12

Sprinkler system/Wheels - Freeze risk

Fig. Wheel rack
  1. Rear water tank
  2. Sprinkler nozzle
  3. Sprinkler system

Preventive measures when there is a risk of freezing.

Draining the system.

• Close the valve

• Separate the hose

• Open the coarse filter

• Loosen the intake to the pump by moving the plastic

clamp to the left and pulling the white plastic adapter from
the pump housing.

• Open the valves in the ends of the sprinkler ramps.

• Allow the fluid to run out and run the sprinkler pump for

about 10 seconds.

The tank can be drained by opening the valve by the
divider hose.

Freeze protection

Freeze protection can also be achieved by connecting
a separate container, after dividing the hose, with
water mixed with glycol and running approx. 2 liters in
the system.

101

Summary of Contents for CC424CHF































































































































































Search results

Summary of Contents for CC424CHF

Reviews:

Related manuals for CC424CHF

Brands by name

Popular brands

Fayat CC424CHF, Instruction Manual

Search results

Summary of Contents for CC424CHF

Reviews:

Related manuals for CC424CHF

Brands by name

Popular brands