Fayat CC424CHF, Instruction Manual

Page: 135 / 158

Maintenance - 1000h
4812159501_D.pdf 2018-04-12
Diesel engine
Oil change
The engine's oil drain plug is located under the rear
frame on the machine on the right side.The drain plug
is accessed by first removing the rubber plug on the
underside of the frame.
Figure. Underside of rear frame
1. Oil draining of diesel engine
1
Drain the oil when the engine is warm. Place a
receptacle that holds at least 14 liters (15 qts) under
the drain plugs.
Take great care when draining engine oil. Wear
protective gloves and goggles. Take great care when draining engine oil. Wear
protective gloves and goggles.
Unscrew the drain plug (1). Allow all the oil to drain out
and refit the plug.
Deliver the drain oil for environmentally correct
handling. Deliver the drain oil for environmentally correct
handling.
Fill with fresh engine oil, see Lubricant specification or
the engine manual for the correct grade of oil.
Fill with the requisite volume of engine oil. See
technical specifications before starting the machine.
Allow the engine to idle for a few minutes, and then
switch off the engine.
Check the dipstick to ensure that the engine oil level is
correct. Refer to the engine manual for details. Top up
with oil if necessary to the max mark on the dipstick.
Engine
Replacing oil filter
Figure. Engine compartment, right side
1. Oil filter
2. Service panel
2
1
The oil filter (1) is located at the back on the engine
and can easily be accessed by removing the service
panel on the right side between the rear frame and
drum.
See the engine manual for information about replacing
the filter.
123