Fayat CC424CHF, Instruction Manual

Page: 112 / 158

Maintenance, 10h
4812159501_D.pdf 2018-04-12
Sprinkler system/Wheels - Check
Fig. Wheel rack
1. Rear water tank
2. Sprinkler nozzle
1
2
Fill the rear tank with emulsion fluid, e.g. water mixed
with 2% cutting fluid. Check that the sprinkler nozzles
(2) are not blocked, and if necessary clean them and
the filter. See under Sprinkler system/Drum; Check -
Cleaning, for detailed instructions.
Inspect the tire treads from time to time to ensure
that no asphalt has stuck to the tires. This can
happen before the tires have warmed up. Inspect the tire treads from time to time to ensure
that no asphalt has stuck to the tires. This can
happen before the tires have warmed up.
Fluids that are flammable or detrimental to the
environment must not be used in the emulsion
tank. Fluids that are flammable or detrimental to the
environment must not be used in the emulsion
tank.
The footstep is accessible when the cover is folded
down.
The footstep is folded out by lifting it up and then
pulling it out.
To close the cover the footstep must be folded back.
The foot step should not be used while operating,
is only for usage on a non-operative machine. The foot step should not be used while operating,
is only for usage on a non-operative machine.
100