Fayat CC424CHF, Instruction Manual

Page: 125 / 158

Maintenance measures - 250 h
4812159501_D.pdf 2018-04-12
Air conditioning (Optional)
Drying filter - Inspection
With the unit in operation, check using the sight glass
(1) that bubbles are not visible on the drying filter.
Figure. Drying filter
1. Sight glass
2. Filter holder
1
2
Park the roller on a level surface, chock the wheels
and activate the parking brake. Park the roller on a level surface, chock the wheels
and activate the parking brake.
The filter is placed at the top of the rear part of the cab
roof.
If bubbles are visible through the sight glass, this
indicates that the refrigerant level is too low. Stop the
unit to avoid risking damage. Fill up with refrigerant.
The refrigerant circuit is only to be worked on by
authorized companies. The refrigerant circuit is only to be worked on by
authorized companies.
Edge cutter (Optional)
- Lubrication
Figure. Two grease points for
lubricating the edge cutter
2
1
Refer to the operation section for information on
how to operate the edge cutter. Refer to the operation section for information on
how to operate the edge cutter.
Grease the two points as shown in the figure.
Grease should always be used for lubrication, see the
lubricant specifications.
Grease all bearing points with five strokes of a
hand-operated grease gun.
113