Fayat Group Dynapac CP2100, Instruction Manual

Page: 90 / 130

Scheduled maintenance and lubrication
84 4812314580EN 2020-01-06
MONTHLY (Every 250 hours of operation)
POSITION
IN THE
FIGURE
ACTION NOTES
1, 2 Replace the Diesel engine oil and
the oil filter Refer to the engine
manual instructions.
8 Check and clean the hydraulic
water and Diesel engine water
coolers. If necessary
18 Check the air conditioning When equipped (option)
16 Check the batteries
Lubricate the pilot and link bearings
20 Lubricate the lower pivot bearing
21 Lubricate the upper pivot bearing
Replace the air dryer filter Machine equipped with
AOR
EVERY THREE MONTHS (Every 500 hours of operation)
POSITION
IN THE
FIGURE
ACTION NOTES
3 Replace the Diesel engine fuel filter Refer to the engine
manual instructions.
- Replace the Diesel engine pre-filter Refer to the engine
manual instructions.
- Check the bolted joints
7 Check the hydraulic oil tank cover
15 Lubricate the seat bearing
20 Lubricate the lower pivot bearing
21 Lubricate the upper pivot bearing
22 Lubricate the pivot bearing
Replace the air dryer filter Machine equipped with
AOR