Fayat Group Dynapac CP2100, Instruction Manual

Page: 69 / 130

Parking
2020-01-06 4812314580EN 63
Hydraulic oil reservoir
Fill the hydraulic reservoir until the uppermost level mark
(refer to the section "Every 10 Hours of Operation").
Tires
Make sure the tires pressure is at least 200 kPa (29 PSI).
Place supports under the chassis so that the tires are not
overloaded.
Steering cylinder, hinges, etc.
Grease the steering cylinder plunger spindle to preserve it.
Also lubricate the hingers on the engine compartment and cab
doors.
Hoods, tarpaulin
Lower the instruments hood/covering over the instrument
panel.
Cover the entire roller with a tarpaulin. It shall have a gap
between it and the ground.
If possible, store the machine indoors and preferably in a
place with regular temperature.
When stopping and parking the equipment, always apply the
parking brake.
As a precaution measure, chock the roller tires when parking
on slopes and turn off the engine.
To prevent accidents, when parking on slopes,
stop transversally to the road towards the slope.
Never leave the roller with the engine running.
Before leaving it, apply the emergency/parking
brake.
Make sure the roller is parked in a safe place and
that it is not obstructing the traffic.