Fayat Group Dynapac CP2100, Instruction Manual

Page: 33 / 130

Instrument/controls - Description and function
2020-01-06 4812314580EN 27
Control panel – General description
When the ignition key is in the position "I", the start screen is
visible on the display. It remains activated for a few seconds
then it switches to the status screen.
The status screen provides information about the fuel level,
the sprinkler tank water level, the working hours and the
voltage level. The water and fuel levels are specified in
percentage (%).
The screen remains visible until the Diesel engine is turned on
or if one of the function buttons below the screen is pressed.
If the engine starts before you choose the screen, it will switch
to the main screen.
This screen provides an overview and it remains on during the
operation:
- The speed is shown in the middle of the screen.
- The high/low speed mode is shown with a symbol in the
middle of the screen.
- The engine rpm, the asphalt temperature (option) and the
tires pressure (option) are shown in the upper left corner and
in the lower left corner, respectively.
Fig. – Start screen
Fig. – Status screen
Fig. – Main working screen