Fayat Group Dynapac CP2100, Instruction Manual

Page: 56 / 130

Operation
50 4812314580EN 2020-01-06
Display and button set
The parking brake symbol is shown when the
parking brake is activated.
= Low speed.
= Automatic water control (AWC). The sprinkling is
activated when the forward/backward lever is in the neutral
position.
= Tire pressure.
= Sprinkler activation for edge cutter.
= High/low speed mode (in the center of the screen).
= Alarm display, see the table below for information.
Alarm descriptions
SYMBOL DESCRIPTION FUNCTION
Warning lamp, hydraulic oil
filter If the lamp is lit with the engine in maximum rpm, it shall
be necessary to replace the hydraulic oil filter.
Warning lamp, air filter If the lamp is lit with the engine in maximum rpm, it shall
be necessary to clean or replace the air filter.
Warning lamp, battery
charging If the lamp is lit with the engine running, the alternator is
not charging. Stop the engine and find the fault.
Warning lamp, engine
temperature If the lamp is lit it means the engine is too hot. Stop
IMMEDIATELY the engine and find the fault. Refer to
the engine manual.
Warning lamp, hydraulic oil
temperature If the lamp is lit it means the hydraulic oil is too hot. Do
not operate the roller. Cool the oil making the engine run
in idle and locate the fault.