Fayat Group Dynapac CP2100, Instruction Manual

Page: 7 / 130

Introduction
2020-01-06 4812314580EN 1
Introduction
Dynapac CP2100 / CP2100W
Dynapac CP2100 is a 21 tones rubber wheel roller, with
5,905 ft (1,800 m) width. CP2100 is also available on the
wide base version (CP2100W), with larger tires and 7,480
ft (2,280 m) width.
It has three direction front wheels and four back wheels.
The hydrostatic drivers, the flexible ballast solution and a
wide range of option equipment indicate that the machine
has different settings available. CP2100 is mainly used
together with other asphalt rollers to seal surfaces. Thanks
to its weight, it also serves as a roller for other types of
ground.
Warning symbols
WARNING! Damage to the machine or its
parts.
CAUTION! Risk of death or injures.
Safety information
The Safety Manual delivered with the
machine shall be read by the operator.
Always follows the safety instructions and
keep the Manual inside the machine.
It is recommended to at least train the operators
on daily handling and maintenance of the
machine, according to the Instruction Manual.
Passengers are not allowed on the machine, and
the operator must be on the seat whenever he
operates the equipment.
Read throughout the manual before starting the
machine and before performing any
maintenance.
Request immediately new manuals if the old ones
are lost damaged or become illegible.
Make sure there is a good vent (air exhaust)
when the engine is turned on in closed facilities.