Fayat Group Dynapac CP2100, Instruction Manual

Page: 89 / 130

Scheduled maintenance and lubrication
2020-01-06 4812314580EN 83
WEEKLY (after the first 50 hours of operation)
POSITION
IN THE
FIGURE
ACTION NOTES
1, 2 Replace the Diesel engine oil and
the oil filter Refer to the engine manual
instructions.
10 Check and replace the main air filter Refer to the engine manual
instructions.
10 Check and replace the secondary
air filter Refer to the engine manual
instructions.
3 Replace the engine fuel filter Refer to the engine manual
instructions.
4 Replace the hydraulic oil filters
20 Lubricate the lower pivot bearing
21 Lubricate the upper pivot bearing
23 Replace the wheel gear oil
WEEKLY (Every 50 hours of operation)
POSITION
IN THE
FIGURE
ACTION NOTES
- Check the engine air intake system Refer to the engine manual
instructions.
- Check the tires air pressure
- Retighten the wheel nuts
10 Check and clean the engine air filter
elements Replace them, if necessary
- Drain the fuel pre-filter Refer to the engine manual
instructions.
18 Check the air conditioning When equipped (option)
- Clean the air conditioning
19 Check and lubricate the edge cutter When equipped (option)
20 Lubricate the lower pivot bearing
21 Lubricate the upper pivot bearing