Check, clean the air filter, replace if necessary
BOMAG
55
008 921 86
6.6
!
Caution
Do not use compressed air to blow out the air filter
housing.
Fig. 11
!
Danger
Eye injury!
Wear safety goggles.
!
Caution
Do not hold the compressed air nozzle closer to
the filter than 1 in (3 cm)
l
Bang the paper filter element several times against
a hard surface.
l
Blow out the paper filter element with clean com-
pressed air and a maximum air pressure (max. 30
PSI/2.1 bar) (Fig. 11).
l
Clean the foam rubber element in warm soapsuds,
rinse and dry thoroughly.
l
Then submerge the foam rubber element in clean
engine oil and finally press out all excess oil.
i
Note
If the amount of oil remaining in the foam rubber ele-
ment is too high, the engine will develop smoke during
starting.
Fig. 12
l
Place the foam rubber element (6) (Fig. 12) on the
paper element (4).
l
Reinstall the assembled air filter. Make sure that the
seal (5) under the air filter is present.
l
Tighten the wing nut (3).Tighten the screw (3).
l
Attach the filter cover (2) to the air filter housing and
secure it with the air filter cover lockl (1).
Go
to
Discount-Equipment.com
to
order
your
parts
