1.3
General repair instructions
BOMAG
20
008 921 86
Identification of UNF-threads
Fig. 10
Screws
The screw head is marked with a stamped in, round
cavity 3 (Fig. 10).
Nuts
An uninterrupted series of stamped in circles parallel
to the axis of the nut on a hexagon area (2).
Studs and brake rods
At the outmost end a short end of the component is re-
duced to its core diameter (1).
Cotter pins
Fig. 11
In places where cotter pins are used, these must be
reassembled. Cotter pins must generally be renewed
after disassembly.
Cotter pins must be assembled as shown in the illus-
tration, unless specified differently.
Go to
Discount-Equipment.com
to
order your parts
