Pressure test in steering circuit
BOMAG
105
008 921 86
8.9
8.9
Pressure test in steering circuit
!
Caution
Perform measurements at operating tempera-
ture of the hydraulic oil (40 °C).
1. Pull up the parking brake lever. (Fig. 1).
2. Connect a 600 bar pressure gauge to the steering
pressure test port (Fig. 2).
3. Engage the articulation lock (Fig. 3).
4. Start the engine and run it at idle speed.
5. Operate the steering system and read the pres-
sure gauge.
Nominal value
approx. 100 bar
Evaluation of test
If the nominal value is reached, check the steer-
ing cylinder.
Fig. 1
Fig. 2
Fig. 3
Go
to
Discount-Equipment.com
to
order
your
parts
