10.5
Asembling the vibrating drum
BOMAG
138
008 921 86
Measuring the end float
9. Push the exciter shaft into the bearing flange
against the stop (Fig. 8).
10. Measure the distance between coupling and front
face of bearing flange .
11. Pull the exciter shaft out against the stop.
12. Measure the distance between coupling and front
face once again.
i
Note
Subtract the second measurement from the first
measurement to calculate the end float.
Nominal value:
min. 0.65 mm
max. 1.89 mm
13. Insert coupling element 1 (Fig. 9) into the cou-
pling hub.
Assembling the travel bearing on the
vibration side
1. Attach shim 1 (Fig. 10).
2. Install the new V-ring (2) to the bearing flange and
lubricate as shown.
Fig. 8
Fig. 9
Fig. 10
Go
to
Discount-Equipment.com
to
order
your
parts
