10.5
Asembling the vibrating drum
BOMAG
136
008 921 86
10.5 Asembling the vibrating drum
Assembling / installing the exciter
shaft
1. Cool the new cylinder roller bearing 1 (Fig. 1)
down to -25°C and press it into the bearing flange
until it bottoms, fill with high pressure grease.
i
Note
Fill approx. 15 g of lithium saponified high pres-
sure grease into the gap between the rolling ele-
ments and approx. 15 g into the grease chamber
of the flanged bearing cover.
2. Cool the new cylinder roller bearing 1 (Fig. 2)
down to -25°C and press it into the bearing cover,
fill with grease.
i
Note
Fill approx. 15 g of lithium saponified high pres-
sure grease into the gap between the rolling ele-
ments and approx. 15 g into the grease chamber
of the flanged bearing cover.
3. Bolt the bearing cover to the drum with fastening
screws 1 (Fig. 3).
Fig. 1
Fig. 2
Fig. 3
Go
to
Discount-Equipment.com
to
order
your
parts
