Change the fuel pre-filter
BOMAG
53
008 921 86
6.4
l
Clean the sealing face on the filter carrier (3) from
any dirt.
l
Slightly oil the rubber seal (4) on the new filter car-
tridge.
l
Turn the new filter cartridge on by hand, until the
seal contacts.
l
Tighten the filter cartridge for another 3/4 turn.
Fig. 6
l
Fill in new engine oil (Fig. 6).
l
Screw the oil filler cover back on again.
l
After a short test run check the oil level once again
, if necessary top up to the top mark (Max).
6.4
Change the fuel pre-filter
!
Danger
Fire hazard!
When working on the fuel system do not use open
fire, do not smoke.
Do not spill any fuel.
!
Danger
Health hazard!
Do not inhale any fuel fumes.
Environment
Catch running out fuel, do not let it seep into the
ground.
Dispose of the used fuel precleaners environmen-
tally.
Fig. 7
l
Loosen the hose clamps (Fig. 7).
l
Pull the fuel filter out of the top and bottom hoses.
l
Install the new fuel filter by observing the flow direc-
tion.
l
Retighten the hose clamps.
Go
to
Discount-Equipment.com
to
order
your
parts
