FARMSCAN Jackal, Manual, Page: 37 / 52

AM-JACKAL-35 / JULY 2020 35
Highlight & EDIT the
Run:Stop value to
0V:+12V
Highlight & EDIT the Run to
Stop voltage.
The option allows the output
selected to pull from:
+12v to 0V or
0v to 12v
Press EXIT 3 times to return
to the Front Screen
IF YOU FIND DURING THE
FIRST BATCH OR ON STARTUP
YOUR SOLENOID IS WORKING
IN REVERSE – CHANGE THE
RUN:STOP VALUE
OPERATION
Start by pressing the PAGE
button and toggle between
ALARM TRIP SETUP
To
IIIIIIII RESET
Press RESET to clear the
count value followed by
START .
Water will flow and the
batch will start to either
count UP or count DOWN as
selected.
START will toggle to STOP if
you need to restart a batch.
RUN/HOLD also performs
the same action
Press RESET if required.
If you need to keep a record
of your batch, press the
PAGE button and press the
TRIP button to save.
More about TRIPS on
PAGE 40
TIP: If you want to see a Total Litres displayed (rather than
L/Min) – Change the FRONT SCREEN value from L/Min to L
Refer to the Flow Meter Setup
All Values can be reset or saved when using the TRIP
functions
THIS ENDS THE SETUP FOR A LIQUID BATCH METER