AM-JACKAL-35 / JULY 2020
31
RATE MONITOR – LIQUID
The Jackal can be setup to display an application rate when using both
a speed & flow input.
Rates can be displayed in common formats such as L/Ha
Sensors Required:
•
Wheel Sensor/GPS for Speed & Area calculation
•
Flow meter (any style) to display Litres
Available Connections:
Refer to Installing Sensors from
PAGES 9-11
SETUP LIQUID (L/HA)
1.
Follow the setup guide on page
21
for “Speed/Area Meter setup”
2.
Follow the setup guide on page
27
for “Flow Meter Setup”
3.
Follow the steps as described below
From the front screen press
SETUP
Highlight
FRONT SCREEN
&
press
SELECT
Highlight the line in which
the Flow Meter is connected
to.
e.g. 3: Input#3 L/min
Press
EDIT
Highlight the
UNIT
& press
EDIT
to change the unit to
L/Ha
.
At no stage can the Jackal
take into account multiple
sections turning on an off
and adjusting the Ha to suit.
This feature is only available
in the Jackal Spray Control
configuration
Press
EXIT
3 times to return
to the front screen.
Jackal will now display the
flow rate as L/Ha with Area &
Speed
THIS ENDS THE SETUP FOR RATE METER SETUP AS L/Ha
Summary of Contents for Jackal
Page 1: ...JULY 2020 For Serial Numbers 7000 9999 ...
Page 51: ......