AM-JACKAL-35 / JULY 2020
13
OVERVIEW
BUTTON FUNCTIONS
1.
Power On/Off button
a.
Power is turned on by pressing the
ON/OFF
button for 1 second.
b.
Power is turned off by holding the
ON/OFF
button for 2 seconds.
2.
Run/Hold button
a.
The
RUN/HOLD
button has a dual function.
a.
Press
RUN/HOLD
once to place the ‘MONITOR ON HOLD’.
b.
Press
RUN/HOLD
again to resume operation.
b.
The
RUN/HOLD
state is indicated in the top left-hand corner of the screen. When the monitor is in
RUN mode, the unit displays RUN to signify that the monitor is active.
c.
When the monitor is in
HOLD
mode the unit displays the word “
HOLD” & “BEEPS”
every 2 seconds
3.
Page button
a.
The
PAGE
button is used to scroll through BATCH mode screens or Spray Control functions.
4.
Select button (3 of)
a.
The Jackal has 3 buttons placed directly under the LCD. These buttons will change function in different
menus.
b.
The function of the button is indicated at the bottom of the screen directly above the button.
5.
Navigation button (Up, Down, Left, Right, Enter)
a.
The Round navigation (
NAV
) buttons are used to navigate
UP/DOWN
/
LEFT/RIGHT
in calibration screens
as well as scrolling through the display lines on the main screen.
b.
ENTER
is used to select the option highlighted onscreen.
4
3
1
2
5
Summary of Contents for Jackal
Page 1: ...JULY 2020 For Serial Numbers 7000 9999 ...
Page 51: ......