February 2017
www.farmscanag.com
AM-74V1-4
93
Front Screen Control
FRONT SCREEN CONTROL
FRONT SCREEN CONTROL (SPRAY BAR)
To set up Spray Section Control on the Front Screen tiles, follow these steps (once the sections have been
configured from the previous section):
1.
Hold a finger on the tile you desire to turn into a Spray Section Control for ~1 second and release.
2.
Select the Other tab.
3.
Select Spray Bar from the list.
4.
Select the green Tick button.
NOTE:
Spray Section Control tiles can be joined together to make them bigger just like any other tile; this
will make it easier to operate if the optional switch box is not installed.
FRONT SCREEN CONTROL (APPLICATION RATE)
If there is no Front Screen tile showing the value for Tank X Rate
(where X is the number of the tank you wish to adjust) then create a
tile showing this value (follow directions for setting up Front Screen
tiles).
1.
Select the Front Screen tab that contains the Tank X Rate tile (where X is the number of the tank
you wish to adjust).
2.
Select the tile which will now show the desired application rate for the tank.
3.
Select the + button to increment the desired application rate by the desired application rate step
(Step Size option).
4.
Select the – button to decrement the desired application rate by the desired application rate step
(Step Size option).
5.
Select the tile again to return it to its normal state.