February 2017
www.farmscanag.com
AM-74V1-4
86
Screen & Layout Setup
2.
Select what value you wish to display from the display table below by Selecting on the value, the
selected value will be highlighted. (Example below would be SPEED)
3.
Once you have selected a value, select which units you want the value to be shown in from the
units table; the selected unit will be highlighted.
4.
Give the tile a custom name (if you like) by selecting the Name button and entering the name on
the keyboard. Select the green Tick button once you are done.
5.
Pressing the Cog button allows you to set how many decimal places to be displayed and the target
point accuracy. Control Enabled (Yes/ No) is useful if you wish to display L/ha and L/m on two
different tile.
NOTE:
Only ONE tile has the ability to control.
6.
Select the green Tick button (7) to accept these changes and modify the tile, or select the red Cross
button (6) to cancel these changes.
4
7
2
3
5
6