FARMSCAN 74V1 Operator'S Manual Download Page 28

Page: 28 / 103

February 2017

www.farmscanag.com

AM-74V1-4

Device Menu Overview

Remove Job

Select this button to remove the currently selected Job.

WARNING: This will remove all information saved in the selected Job.

The selected Job is the row highlighted in blue in the Job list.

Show Job Details

Display details of the selected Job. This include total and applied distance, time and area of
the Job and applied products.

The selected Job is the row highlighted in blue in the Job list.

Edit Job Name

Select this button to edit the name of the selected Job.

The selected Job is the row highlighted in blue in the Job list.

Edit Job Units

Select this button to open a menu allowing the user to change in which units Job details are
displayed.

10.

Export to CSV

Allows the operator to export the selected Jobs via CSV (text) onto a USB memory stick.

Summary of Contents for 74V1








































































































Search results

Summary of Contents for 74V1

Reviews:

FARMSCAN 74V1, Operator'S Manual, Page: 28 / 103

Search results

Summary of Contents for 74V1

Reviews: