February 2017
www.farmscanag.com
AM-74V1-4
51
Tank Setup
CAPACITY (2)
To setup the capacity of a tank, follow these steps:
1.
Select a tank in the list on the left to select it. (Refer to previous page)
2.
Select the Tank X button.
3.
Select the Capacity button.
a.
Enter the volume of the tank.
b.
Select a unit using the Up and Down arrows. (If required to change from Litres)
c.
Select the green Tick button.
4.
To set the level of the tank, do one of the following:
a.
Select the Set Full button to set the tank to 100%.
b.
Select the Set Empty button to set the tank to 0%.
c.
Select the Level Alarm button to input the tank level as either an estimated (computed) or
external (tank level sensor) value. If unsure, leave option as ESTIMATED
5.
Select the green Tick button to save your changes.
3
4
4c
4
b