February 2017
www.farmscanag.com
AM-74V1-4
50
Tank Setup
TANK SETUP
1.
Tank Number (X)
a.
Select to show the configuration for each tank (if applicable).
2.
Tank X Capacity
a.
Shows the estimated capacity as a fraction of the total capacity.
b.
Select to configure tank volume and level settings.
3.
Rate
a.
The application rate being applied.
b.
Select to adjust desired rate and step (if applicable).
4.
Setup
a.
Setup the flow control valve.
b.
Select a pre-defined valve setup, or enter a custom value.
5.
Test
a.
Select to go to the Test menu.
6.
Flow Calibration
a.
Shows the product currently calibrated for the flow meter being used.
b.
Select to change flow meter calibrations for a different product..
7.
Add/Remove Tank
a.
Use this to add a second tank to your setup.
NOTE:
Please note that your UNIPOD must be programmed & setup for this type of dual
rate application.
1
2
3
5
6
4
7