Farmi Forest CH27 ACC, Operation, Maintenance And Spare Parts Manual

Page: 25 / 128

25 CH27 ACR & ACC
MOUNTING OF THE DISCHARGE
PIPE
1. Mount the lower part of the discharge pipe (A) using
the mounting hardware (B). Always clamp the lower
part with levers (C) (fig. 1).
2. Lift the discharge pipe to the correct height and in-
sert the M20x260 pin (D).
3. Move the discharge pipe to the working position and
secure it using the wing nut (E) (fig. 2).
4. The long discharge pipe (F) is assembled on the
floor before it is mounted at the correct position in
the same way as the short discharge pipe. Insert the
M20x260 pin (D), set the discharge pipe to the up-
per position and secure it using the wing nut.
If the chipper is equipped with an optional discharge pipe
control device, the latter must be mounted on the chip-
per before the discharge pipe. First, the control device is
mounted to the chipper using the lock band and then the
discharge pipe is installed to the control device as desc-
ribed above.
Fig. 1.